Check the machine rental offer
Wall height ~ 500 mm with thickness 2mm - hot-dip galvanised.
A2HS adapter - 2 horizontal worm drums - hot-dip galvanised
Hot-dip galvanised two-position drawbar for connecting to the tractor's lower or upper hitch with
replaceable eye, drawbar approved in accordance with Regulation 2015/208
replaceable eye, drawbar approved in accordance with Regulation 2015/208
Hot-dip galvanised front guard, meeting safety requirements
New 11.5/80-15.3 wheels
Axles from renowned ADR company, full beam with 70 mm square cross-section, 300x60 brake
Technical data
- Administrative loading capacity ~ 3,980 kg
- Technical loading capacity ~ 3,980 kg
- Gross vehicle weight rating according to PL regulations 5,700 kg
- Gross vehicle weight rating according to Directive 2015/208
(only load on axles) 3,900 kg - Unladen mass ~ 1,720 kg
- Number of axles 1
- Adapter A2HS – 2 horizontal worm drums
- Length 5,810 mm
- Width 2,120 mm
- Height 2,720 mm
- Length of loading space ext. (góra) 3,770 mm
- Width of loading box interior 1,735 mm
- Height of loading box walls 500 mm
- Height of platform from base 1,070 mm
- Loading height 1,570 mm
- Floor/wall sheet thickness 4 / 2 mm
- Conveyor drive Mechanical from the PTO shaft
- Adapter drive Mechanical from the PTO shaft
- Openable side walls No
* unladen mass and loading capacity may vary depending on equipment
- Loading capacity (loading 5cm above the side walls) 3.5 m3 (heaped 4 m3)
- Track of wheels 1,500 mm
- Suspension rigid
- Max. vertical drawbar eye load 1,800 kg
- Drawbar coupling height – lower position 430 mm
- The height of the drawbar clutch – upper position 900 mm
- Max. tolerable axle load 3,900 kg
- Tyre size 11.5/80-15.3
- Design speed 30 km/h
- Minimum demand for tractor power 33kW/45KM
- Spreading width depending on manure used ~2 – 3 m**
** – szerokość rozrzutu może się różnić od podanej, w zależności od użytego materiału
Downloads
Features and accessories
- Wall height ~ 500 mm with thickness 2mm – hot-dip galvanised.
- A2HS adapter – 2 horizontal worm drums – hot-dip galvanised
- Exchangeable floor made of hot-dip galvanised flat sheet
- Hot-dip galvanised two-position drawbar for connecting to the tractor’s lower or upper hitch with
replaceable eye, drawbar approved in accordance with Regulation 2015/208 - Mechanical drive of the conveyor from the PTO shaft with 9-step adjustment
- Hot-dip galvanised adapter cover
- Hot-dip galvanised front guard, meeting safety requirements
- Bolted drawbar diam. 50
- “Hot-dip galvanised bottom frame made of metallurgical 160 channel sections
- Hot-dip galvanised bottom frame made of metallurgical 160 channel sections”
- Straight drawbar support with collapsible steel wheel, partially hot-dip galvanised
- Hot-dip galvanised conveyor chain, link diameter 11 mm
- Exchangeable, hot-dip galvanised conveyor strips made of 50x25x3 profile
- Parking handbrake with crank
- Star wheels made of spheroidal graphite iron
- Lighting installation connector cable with 7PIN 12V plug
- Lighting 12V, homologated, bulb rear lights, LED front lights, contour reflectors
- Pneumatic double-circuit brake system with manual braking force adjustment
- New 11.5/80-15.3 wheels
- Axles from renowned ADR company, full beam with 70 mm square cross-section, 300×60 brake
- Two wheel chocks placed in galvanised pockets
- Rigid suspension
Additional equipment
- Hot-dip galvanised volume extensions with rear gravity fl ap – height 500 mm * (* it is not possible to
mount the extensions together with the adapter) - Rear wall, 500 mm high, hot-dip galvanised (board, mounted in place of the adapter)
- Hydraulic drawbar support
- Defl ector (applies to the vertical adapter)
- Hydraulic rear wall (in front of adapter)
- A4V adapter – 4 inclined vertical worm drums with discs and lime board – hot-dip galvanised
- Full LED lighting
- Hydraulic quick-coupler with pressure neutralizer in hose
- Homologated, hydraulic double-circuit brake system with automatic braking force adjustment
- New 400/60-15.5 wheels
- Articulated PTO shaft for coupling to tractor
- Articulated, wide-angle PTO shaft for coupling to tractor
- Warning triangle (sign distinguishing slow-moving vehicle)
- Hitch rod diam. 40
Gallery
