Spreaders

MANURE SPREADER N-233/5 EU

keyCheck the machine rental offer
MANURE SPREADER N-233/5 EU
Wall height 750 mm with thickness 2mm - hot-dip galvanised.
A2HS adapter - 2 horizontal worm drums - hot-dip galvanised
Hot-dip galvanised two-position drawbar for connecting to the tractor's lower or upper hitch with
replaceable eye, drawbar approved in accordance with Regulation 2015/208
Straight drawbar support with collapsible steel wheel, partially hot-dip galvanised
New 400/60-15.5 wheels
Axles from renowned ADR company, full beam with 70 mm square cross-section, 300x60 brake

Dane techniczne Technical data

  • Type / Variant / Version according to EU homologation N-1 310 11
  • Administrative loading capacity ~ 4,560 kg
  • Technical loading capacity ~ 4,560 kg
  • Gross vehicle weight rating according to PL regulations 6,400 kg
  • Gross vehicle weight rating according to Directive 2015/208
    (only load on axles) 4,600 kg
  • Unladen mass ~ 1,840 kg
  • Number of axles 1
  • Adapter A2HS – 2 horizontal worm drums
  • Length 5,810 mm
  • Width 2,120 mm
  • Height 2,735 mm
  • Length of loading space ext. (góra) 3,770 mm
  • Width of loading box interior 1,720 mm
  • Height of loading box walls 750 mm
  • Height of platform from base 1,085 mm
  • Loading height 1,835 mm
  • Floor/wall sheet thickness 4 / 2 mm
  • Conveyor drive Mechanical from the PTO shaft
  • Adapter drive Mechanical from the PTO shaft
  • Openable side walls No

* – unladen mass and loading capacity may vary depending on equipment


  • Loading capacity (loading 5cm above the side walls) 5 m3 (heaped 5.6 m3)
  • Track of wheels 1,500 mm
  • Suspension rigid
  • Max. vertical drawbar eye load 1,800 kg
  • Drawbar coupling height – lower position 445 mm
  • The height of the drawbar clutch – upper position 915 mm
  • Max. tolerable axle load 4,600 kg
  • Tyre size 400/60-15.5
  • Design speed 30 km/h
  • Minimum demand for tractor power 33kW/45KM
  • Spreading width depending on manure used ~4 – 6 m**

** – the spreading width may differ from the specified one, depending on the material used

 

Cechy produktu i wyposażenie Features and accessories

  • Wall height 750 mm with thickness 2mm – hot-dip galvanised.
  • A2HS adapter – 2 horizontal worm drums – hot-dip galvanised
  • Exchangeable floor made of hot-dip galvanised flat sheet
  • Hot-dip galvanised two-position drawbar for connecting to the tractor’s lower or upper hitch with replaceable eye, drawbar approved in accordance with Regulation 2015/208
  • Mechanical drive of the conveyor from the PTO shaft with 9-step adjustment
  • Hot-dip galvanised adapter cover
  • Hot-dip galvanised front guard, meeting safety requirements
  • Bolted drawbar diam. 50
  • “Hot-dip galvanised bottom frame made of metallurgical 160 channel sections
  • Hot-dip galvanised bottom frame made of metallurgical 160 channel sections”
  • Straight drawbar support with collapsible steel wheel, partially hot-dip galvanised
  • Hot-dip galvanised conveyor chain, link diameter 11 mm
  • Exchangeable, hot-dip galvanised conveyor strips made of 50x25x3 profile
  • Parking handbrake with crank
  • Star wheels made of spheroidal graphite iron
  • Lighting installation connector cable with 7PIN 12V plug
  • Lighting 12V, homologated, bulb rear lights, LED front lights, contour reflectors
  • Pneumatic double-circuit brake system with manual braking force adjustment
  • New 400/60-15.5 wheels
  • Axles from renowned ADR company, full beam with 70 mm square cross-section, 300×60 brake
  • Two wheel chocks placed in galvanised pockets
  • Rigid suspension

Dodatkowe wyposażenie Additional equipment

  • Hot-dip galvanised volume extensions with rear gravity fl ap – height 500 mm * (* it is not possible to
    mount the extensions together with the adapter)
  • Rear wall, 500 mm high, hot-dip galvanised (board, mounted in place of the adapter)
  • Hydraulic drawbar support
  • Hydraulic rear wall (in front of adapter)
  • Full LED lighting
  • Hydraulic quick-coupler with pressure neutralizer in hose
  • Homologated, hydraulic double-circuit brake system with automatic braking force adjustment
  • Articulated PTO shaft for coupling to tractor
  • Articulated, wide-angle PTO shaft for coupling to tractor
  • Warning triangle (sign distinguishing slow-moving vehicle)
  • Hitch tension member fi 40

Cookies

The website uses cookies. By using this website you agree to the use of cookies.

Newsletter