Check the machine rental offer
Side walls bent with 1 sheet of sheet 4 mm with S355 steel with a height of 1150 mm with walls
stiffening profiles - hot-dip galvanised
stiffening profiles - hot-dip galvanised
Walls reinforced with a galvanized edge profile 80x80x4 and brackets made of 4 mm steel sheet S355
Wall brackets equipped with a reinforced edge seal to prevent damage to the zinc coating of the walls
New 550/60-22.5 wheels
Adapter AVH2 - two horizontal drums with bolted knives + 2 spreading discs, with a lime counter -
hot-dip galvanised
hot-dip galvanised
Two-position drawbar for coupling with the top or bottom hitch of the tractor, with replaceable 50
mm eye, drawbar homologated according to Regulation 55 UN ECE
mm eye, drawbar homologated according to Regulation 55 UN ECE
Axles from renowned ADR company, full beam with 100 mm square cross-section, 406 x 120 brake
Hot dip galvanized bottom frame with longitudinal sections made of 200x80x6 profiles
Hot-dip galvanized hydraulic rear wall lifted by two cylinders with a stroke of 1250
Technical data
- Type / Variant / Version according to EU homologation N-2 D20 71
- Administrative loading capacity ~14,710 kg (15,710 kg with K80 harnass)
- Technical loading capacity ~14,710 kg (15,710 kg with K80 harnass)
- Gross vehicle weight rating according to PL regulations 21,000 kg (22,000 kg with K80 harnass)
- GVWR according to Directive 2015/208 (only load on
axles) 18,000 kg - Unladen mass ~ 6,290 kg
- Number of axles 2 – tandem
- Adapter AVH2 – 2 horizontal shredding drums + 2
spreading discs - Length 8,255 mm
- Width 2,495 mm
- Height 3,065 mm
- Length of loading space ext. (góra) 5,400 mm
- Width of loading box interior 2,150 / 2,240 mm
- Height of loading box walls 1,150 mm
- Height of platform from base 1,630 mm
- Loading height 2,730 mm
- Floor/wall sheet thickness 3/4 mm
- Conveyor drive Hydraulic lock
- Adapter drive Mechanical from the PTO shaft
- Openable side walls No
* – unladen mass and loading capacity may vary depending on equipment
- Loading capacity (loading 5cm above the side walls) 13.2 m3
- Track of wheels 1,900 mm
- Suspension Tandem – parabolic springs
- Max. Vertical drawbar eye load 3,000 kg (4,000 kg with K80 harnass)
- Drawbar coupling height – lower position 585 mm
- The height of the drawbar clutch – upper position 1,230 mm
- Max. tolerable axle load 1. – 9,000 kg, 2. – 9,000 kg
- Tyre size 550/60-22.5
- Design speed 40 km/h
- Minimum demand for tractor power 88kW/120KM
- Spreading width depending on manure used ~18 – 24 m**
** – spreading width may differ from the specified width depending on the material used
Downloads
Features and accessories
- Side walls bent with 1 sheet of sheet 4 mm with S355 steel with a height of 1150 mm with walls stiffening profiles – hot-dip galvanised
- Adapter AVH2 – two horizontal drums with bolted knives + 2 spreading discs, with a lime counter – hot-dip galvanised
- Exchangeable floor made of hot-dip galvanised flat sheet
- Two-position drawbar for coupling with the top or bottom hitch of the tractor, with replaceable 50 mm eye, drawbar homologated according to Regulation 55 UN ECE
- Hydraulic advance of conveyor with stepless regulation and overload valve
- Hot-dip galvanised hydraulic rear wall
- Service cover for horizontal drums lifted hydraulically
- Hot-dip galvanised front guard, meeting safety requirements
- Bolted drawbar diam. 50
- Hot dip galvanised bottom frame with longitudinal sections made of 200x80x6 profiles
- Hot-dip galvanised upper frame welded from 160x60x4”
- Hydraulic shaft support partially hot-dip galvanised
- Hot-dip galvanised conveyor chain – 14×50 links
- Exchangeable, hot-dip galvanised conveyor strips made of metallurgical C65 profile
- Parking handbrake with crank
- Hot-dip galvanised removable exterior ladder with anti-skid steps, facilitating access to the load box
- Star wheels made of spheroidal graphite iron
- EU homologation
- Lighting installation connector cable with 7PIN 12V plug
- 12V lighting, homologated, with bulbs, LED perimeter lighting
- Pneumatic two-line braking system with ALB
- Hydraulic installations made of galvanised steel tubes and flexible hoses
- Hydraulic connectors to tractor, type ISO 7241-1 DN 12.5
- New 550/60-22.5 wheels
- Axles from renowned ADR company, full beam with 100 mm square cross-section, 406 x 120 brake
Additional equipment
- Two wheel chocks placed in galvanised pockets
- articulated PTO shaft
- Tandem suspension on parabolic leaf springs
- Drive shafts coupled to articulated PTO shafts equipped with clutch protecting the transmission: friction and one-way
- Exchangeable adapter blades
- Exchangeable, galvanised skids of fl oor conveyor strips
- Distance between chains secures against divergence of chains during work
- Floor conveyor powered by two transmissions, 4000 Nm each
- Wood skids for conveyor chains under upper frame
- Hot-dip galvanised bracket for connectors, adjustable
- Wall brackets equipped with reinforced edge seal preventing damage to walls’ galvanised coating
- Rear wall opening height indicator
Gallery
