Check the machine rental offer
Side walls bent with 1 sheet of sheet 3 mm with S355 steel with a height of 1,000 mm with walls
stiffening profiles - hot-dip galvanised
stiffening profiles - hot-dip galvanised
Profile stiffening the side walls
A4VS adapter - 4 inclined vertical worm drums with bolted knives, with discs and lime board, hotdip galvanised
Two-position drawbar for coupling with the top or bottom hitch of the tractor, with replaceable 50
mm eye, drawbar homologated according to Regulation 55 UN ECE
mm eye, drawbar homologated according to Regulation 55 UN ECE
Straight drawbar support with collapsible steel wheel, partially hot-dip galvanised
Technical data
- Administrative loading capacity ~8240 kg*
- Technical loading capacity ~8240 kg*
- Gross vehicle weight rating according to PL regulations 12,500 kg
- GVWR according to Directive 2015/208 (only load on axles) 10,000 kg
- Unladen mass ~ 4,260 kg*
- Number of axles 2 - tandem
- Adapter A4VS adapter - 4 vertical drums
- Length 6,525 mm
- Width 2,400 mm
- Height 2,800 mm
- Length of loading space ext. (góra) 4,300 mm
- Width of loading box interior 2,070 / 2,150 mm
- Height of loading box walls 1,000 mm
- Height of platform from base 1,360 mm
- Loading capacity (loading 5cm above the side walls) 9 m3
- Track of wheels 1,700 mm
- Suspension Tandem - parabolic springs
- Max. Drawbar eye load 2,500 kg
- Drawbar coupling height - bottom position 420 mm
- Drawbar coupling height - top position 1060 mm
- Max. tolerable axle load 1. - 5,000 kg, 2. - 5000 kg
- Tyre size 500/50-17
- Design speed 40 km/h
- Minimum demand for tractor power 66kW/90KM
- Spreading width depending on manure used ~6-8 m**
Downloads
Features and accessories
- Side walls bent from a single 3mm S355 steel sheet, 1000mm high, with wall stiffening profiles hot-dip galvanised
- A4VS adapter with 4 inclined vertical worm drums equipped with bolted knives, plates, and a lime table, hot-dip galvanised
- Exchangeable floor made of hot-dip galvanised flat sheet
- Hot-dip galvanised two-position drawbar for connecting to the tractor’s lower or upper hitch with a replaceable 50mm eye homologated in accordance with Regulation 55UN ECE
- Hydraulic drive of the floor conveyor with stepless adjustment and overload valve
- Hot-dip galvanised hydraulic rear wall
- Hot-dip galvanised adapter cover
- Hot-dip galvanised front guard meeting safety requirements
- Bolted drawbar diameter 50
- Lower and upper frames hot-dip galvanised (protection inside and outside of profiles)
- Mechanical support with crank
- Hot-dip galvanised conveyor chain link diameter 11mm
- Exchangeable hot-dip galvanised conveyor slats
- Parking handbrake with crank
- Removable external ladder, hot-dip galvanised, with anti-slip steps for easier access to the cargo box
- Socket wheels made of spheroidal graphite iron
- EU homologation
- Lighting installation cable with 7PIN 12V plug
- 12V lighting homologated bulb lighting with LED outline illumination
- Pneumatic two-line brake system with an automatic load sensing brake force regulator (ALB)
- Hydraulic installations made of galvanically zinc-coated steel pipes and flexible hoses
- Hydraulic connection to the tractor ISO 7241-1 DN 12.5
- New wheels 500/50-17
- Axles from the renowned ADR company full square beam with 80mm cross-section 300×90 brake
- Two wheel chocks stored in galvanised pockets
- PTO shaft
- Tandem suspension on parabolic springs
- Adapter drive secured with an automatic clutch
- Replaceable adapter knives
- Replaceable galvanised skids for floor conveyor slats
- Chain spacing to prevent chain divergence during operation
- Wooden chain sliders under the upper frame
- Hot-dip galvanised adjustable support for connecting cables
- Wall supports equipped with reinforced edge seals to prevent damage to the zinc coating of walls
- Rear wall height opening indicator
Additional equipment
- Two wheel chocks placed in galvanised pockets
- articulated PTO shaft
- Tandem suspension on parabolic leaf springs
- Adapter drive protected by automatic clutch
- Exchangeable adapter blades
- Exchangeable, galvanised skids of fl oor conveyor strips
- Distance between chains secures against divergence of chains during work
- Wood skids for conveyor chains under upper frame
- Hot-dip galvanised bracket for connectors, adjustable
- Wall brackets equipped with reinforced edge seal preventing damage to walls’ galvanised coating
- Rear wall opening height indicator
Gallery
