Check the machine rental offer
Wall height 1,000 mm - hot-dip galvanised
Hot-dip galvanised 350 mm wall extensions, hydraulically folded to one side, made of 60x30x3 profiles and 2 mm sheet
A2V adapter - 2 balanced inclined vertical drums with bolted knives, with lime board, hot-dip galvanised
Two-position drawbar for coupling with the top or bottom hitch of the tractor, with replaceable 50 mm eye, drawbar homologated according to Regulation 55 UN ECE
Hot-dip galvanised front mesh, meeting safety requirements (according to standard PN-EN 690:2014-02), with folding mechanism for transport purposes
Hydraulic installations made of galvanised steel tubes and flexible hoses
New 550/60-22.5 wheels
Axle from renowned ADR company, full beam with 90 mm square cross-section, 400x80 brake
Technical data
- Administrative loading capacity ~12820 kg*
- Technical loading capacity ~12820 kg*
- Gross vehicle weight rating according to PL regulations 19,000 kg
- GVWR according to Directive 2015/208 (only load on axles) 16,000 kg
- Unladen mass ~ 6,180 kg
- Number of axles 2 – tandem
- Adapter A2V adapter – 2 vertical
drums - Length 8,430 mm
- Width 2,460 mm
- Height 3,030 mm
- Length of loading space ext. (góra) 4,900 mm
- Width of loading box interior 2,080 mm
- Height of loading box walls 1,350 mm
- Height of platform from base 1,560 mm
- Loading height 2910 mm
- Floor/wall sheet thickness 3/2 mm
- Conveyor drive Hydraulic lock
- Adapter drive Mechanical from the PTO
shaft - Openable side walls No
* – unladen mass and loading capacity may vary depending on equipment
- Loading capacity (loading 5cm above the side walls) 14.3 m3
- Track of wheels 1,800 mm
- Suspension Tandem – parabolic springs
- Max. Vertical drawbar eye load 3,000 kg (4,000 kg with K80
harnass) - Drawbar coupling height – lower position 565 mm
- The height of the drawbar clutch – upper position 1,210 mm
- Max. tolerable axle load 1. – 8,000 kg, 2. – 8 000 kg
- Tyre size 550/60-22.5
- Design speed 40 km/h
- Minimum demand for tractor power 74kW/100KM
- Spreading width depending on manure used ~12 m**
** – spreading width may differ from the specified width depending on the material used
Downloads
Features and accessories
- Wall height 1,000 mm – hot-dip galvanised
- Hot-dip galvanised 350 mm wall extensions, hydraulically folded to one side, made of 60x30x3 profiles and 2
mm sheet - A2V adapter – 2 balanced inclined vertical drums with bolted knives, with lime board, hot-dip galvanised
- Exchangeable floor made of hot-dip galvanised flat sheet
- Two-position drawbar for coupling with the top or bottom hitch of the tractor, with replaceable 50 mm eye,
drawbar homologated according to Regulation 55 UN ECE - Hydraulic advance of conveyor with stepless regulation and overload valve
- Hot-dip galvanised hydraulic rear wall
- Divided hot-dip galvanised deflectors
- Hot-dip galvanised front mesh, meeting safety requirements (according to standard PN-EN 690:2014-02), with
folding mechanism for transport purposes - Bolted drawbar diam. 50
- Hot dip galvanised bottom frame with longitudinal sections made of 200x80x6 profiles
- Hot-dip galvanised upper frame welded from 160x60x4 profiles and 200″ metallurgical channel
- Hydraulic shaft support partially hot-dip galvanised
- Hot-dip galvanised conveyor chain – 14×50 links
- Exchangeable, hot-dip galvanised conveyor strips made of metallurgical C65 profile
- Parking handbrake with crank
- Exterior ladder with anti-skid steps, facilitating access to loader box
- Star wheels made of spheroidal graphite iron
- EU homologation
- Lighting installation connector cable with 7PIN 12V plug
- 12V lighting, homologated, with bulbs, LED perimeter lighting
- Pneumatic two-line braking system with ALB
- Hydraulic installations made of galvanised steel tubes and flexible hoses
- Hydraulic connectors to tractor, type ISO 7241-1 DN 12.5
- New 550/60-22.5 wheels
- Axle from renowned ADR company, full beam with 90 mm square cross-section, 400×80 brake
Additional equipment
- Two wheel chocks placed in galvanised pockets
- articulated PTO shaft
- Tandem suspension on parabolic leaf springs
- Drive shafts coupled to articulated PTO shafts equipped with clutch protecting the transmission:
- friction and one-way
- Exchangeable adapter blades
- Exchangeable, galvanised skids of fl oor conveyor strips
- Distance between chains secures against divergence of chains during work
- Floor conveyor powered by two transmissions, 4000 Nm each
OPTIONAL MACHINE EQUIPMENT
- Hot-dip galvanised volume extensions with a hydraulic rear hatch – height 800 mm * (* it is not
possible to mount the extensions together with the adapter) - Installations
- Full LED lighting
- Hydraulic quick-coupler with pressure neutralizer in hose
- Homologated, hydraulic double-circuit brake system with automatic braking force adjustment
- New 600/50-22.5 wheels
- Wide-angle articulated PTO shaft
- Warning triangle
- Digital control – conveyor drive control, rear wall, volume fl ap, hydraulic drawbar support, side extension, hydraulic defl ectors
- Conveyor’s hydraulic feed with electric control in tractor cabin
- K80 drawbar hitch (permitted drawbar eye load up to 4,000 kg)
Gallery
