Check the machine rental offer
Wall height 750 mm - hot-dip galvanised
Two-position drawbar for coupling with the top or bottom hitch of the tractor, with replaceable 50
mm eye, drawbar homologated according to Regulation 55 UN ECE
mm eye, drawbar homologated according to Regulation 55 UN ECE
Top and bottom frame hot-dip galvanised (structure protected on exterior and interior of profiles
Straight drawbar support with collapsible steel wheel, partially hot-dip galvanised
New 500/70-17 wheels
Axles from renowned ADR company, full beam with 90 mm square cross-section, 300x90 brake
Technical data
- Administrative loading capacity ~6,000 kg*
- Technical loading capacity ~6,000 kg*
- Gross vehicle weight rating according to PL regulations 8,970 kg
- Unladen mass ~ 2,970 kg*
- Number of axles 1
- Adapter A2HS – 2 horizontal worm drums
- Length 6,660 mm
- Width 2,425 mm
- Height 2,655 mm
- Length of loading space ext. (góra) 4,050 mm
- Width of loading box interior 2,100 mm
- Height of loading box walls 750 mm
- Height of platform from base 1,340 mm
- Loading height 2,090 mm
- Floor/wall sheet thickness 3/2.5 mm
- Conveyor drive Hydraulic lock
- Adapter drive Mechanical from the PTO shaft
- Openable side walls No
* – unladen mass and loading capacity may vary depending on equipment
- Loading capacity (loading 5cm above the side walls) 7 m3
- Track of wheels 1,800 mm
- Suspension Rigid
- Max. Drawbar eye load 2,500 kg
- Drawbar coupling height – bottom position 400 mm
- Drawbar coupling height – top position 1,040 mm
- Max. tolerable axle load 7,000 kg
- Tyre size 500/50-17
- Design speed 30 km/h
- Minimum demand for tractor power 59kW/80KM
- Spreading width depending on manure used ~2-3 m**
** – spreading width may differ from the specified width depending on the material used
Downloads
Features and accessories
- Wall height 750 mm – hot-dip galvanised
- A2HS adapter – 2 horizontal worm drums – hot-dip galvanised
- Exchangeable floor made of hot-dip galvanised flat sheet
- Two-position drawbar for coupling with the top or bottom hitch of the tractor, with replaceable 50 mm eye, drawbar homologated according to Regulation 55 UN ECE
- Hydraulic advance of conveyor with stepless regulation and overload valve
- Hot-dip galvanised hydraulic rear wall
- Hot-dip galvanised adapter cover
- Hot-dip galvanised front guard, meeting safety requirements
- Bolted drawbar diam. 50
- Top and bottom frame hot-dip galvanised (structure protected on exterior and interior of profiles)
- Straight drawbar support with collapsible steel wheel, partially hot-dip galvanised
- Hot-dip galvanised conveyor chain, link diameter 11 mm
- Replaceable hot-dip galvanised conveyor slats
- Parking handbrake with crank
- Exterior ladder with anti-skid steps, facilitating access to cargo box
- Star wheels made of spheroidal graphite iron
- Lighting installation connector cable with 7PIN 12V plug
- 12V lighting, homologated, rear bulb lamps, LED front lamps, perimeter reflectors
- Two-line pneumatic brake system
- Hydraulic installations made of galvanised steel tubes and flexible hoses
- Hydraulic connectors to tractor, type ISO 7241-1 DN 12.5
- New 500/70-17 wheels
- Axles from renowned ADR company, full beam with 90 mm square cross-section, 300×90 brake
- Two wheel chocks placed in galvanised pockets
- Articulated shaft
- Rigid suspension
Additional equipment
- Hot-dip galvanised volume extensions with a hydraulic rear hatch – height 750 mm * (* it is not possible to mount the extensions together with the adapter)
- Additional hydraulic distributor for tractors with two hydraulic sockets
- Hydraulic drawbar support
- Full LED lighting
- Hydraulic quick-coupler with pressure neutralizer in hose
- Single-line pneumatic brake system
- Single-line hydraulic brake system
- Wide-angle articulated shaft
- Warning triangle
- Digital control – conveyor drive control, rear wall, volume hatch, hydraulic drawbar support
- Conveyor’s hydraulic feed with electric control in tractor cabin
- Hitch tension member K80
Gallery
