Spreaders

MANURE SPREADER N-221/3-8 EU

keyCheck the machine rental offer
MANURE SPREADER N-221/3-8 EU
Wall height 1,000 mm - hot-dip galvanised
A2V adapter - 2 balanced inclined vertical drums with bolted knives, with lime board, hot-dip
galvanised
Two-position drawbar for coupling with the top or bottom hitch of the tractor, with replaceable 50
mm eye, drawbar homologated according to Regulation 55 UN ECE
Hot-dip galvanized front mesh that meets the safety requirements (according to PN-EN 690:2014-02
standards) with a folding mechanism for transport purposes
Hydraulic installations made of galvanised steel tubes and flexible hoses
New 550/60-22.5 wheels
Axle from renowned ADR company, full beam with 90 mm square cross-section, 400x80 brake

Dane techniczne Technical data

  • Type / Variant / Version according to EU homologation N-2 920 51
  • Administrative loading capacity ~10,080 kg*
  • Technical loading capacity ~10,080 kg*
  • Gross vehicle weight rating according to PL regulations 16,000 kg
  • GVWR according to Directive 2015/208 (only load on axles) 13,000 kg
  • Unladen mass ~ 5,920 kg
  • Number of axles 2 – tandem
  • Adapter A2V adapter – 2 vertical
    drums
  • Length 8,430 mm
  • Width 2,460 mm
  • Height 3,030 mm
  • Length of loading space ext. (góra) 4,900 mm
  • Width of loading box interior 2,080 mm
  • Height of loading box walls 1,000 mm
  • Height of platform from base 1,560 mm
  • Loading height 2560 mm
  • Floor/wall sheet thickness 3/2 mm
  • Conveyor drive Hydraulic lock
  • Adapter drive Mechanical from the PTO
    shaft
  • Openable side walls No

* – unladen mass and loading capacity may vary depending on equipment


  • Loading capacity (loading 5cm above the side walls) 10.7 m3
  • Track of wheels 1,800 mm
  • Suspension Tandem – parabolic springs
  • Max. Vertical drawbar eye load 3,000 kg (4,000 kg with K80
    harnass)
  • Drawbar coupling height – lower position 565 mm
  • The height of the drawbar clutch – upper position 1,210 mm
  • Max. tolerable axle load 1. – 6,500 kg, 2. – 6,500 kg
  • Tyre size 550/60-22.5
  • Design speed 40 km/h
  • Minimum demand for tractor power 74kW/100KM
  • Spreading width depending on manure used ~12 m**

** – spreading width may differ from the specified width depending on the material used

Cechy produktu i wyposażenie Features and accessories

  • Wall height 1,000 mm – hot-dip galvanised
  • A2V adapter – 2 balanced inclined vertical drums with bolted knives, with lime board, hot-dip galvanised
  • Exchangeable floor made of hot-dip galvanised flat sheet
  • Two-position drawbar for coupling with the top or bottom hitch of the tractor, with replaceable 50 mm eye, drawbar homologated according to Regulation 55 UN ECE
  • Hydraulic advance of conveyor with stepless regulation and overload valve
  • Hot-dip galvanised hydraulic rear wall
  • Divided hot-dip galvanised deflectors
  • Hot-dip galvanized front mesh that meets the safety requirements (according to PN-EN 690:2014-02 standards) with a folding mechanism for transport purposes
  • Bolted drawbar diam. 50
  • Hot dip galvanised bottom frame with longitudinal sections made of 200x80x6 profiles
  • Hot-dip galvanised upper frame welded from 160x60x4 profiles and 200″ metallurgical channel
  • Hydraulic shaft support partially hot-dip galvanised
  • Hot-dip galvanised conveyor chain – 14×50 links
  • Exchangeable, hot-dip galvanised conveyor strips made of metallurgical C65 profile
  • Parking handbrake with crank
  • Exterior ladder with anti-skid steps, facilitating access to loader box
  • Star wheels made of spheroidal graphite iron
  • EU homologation
  • Lighting installation connector cable with 7PIN 12V plug
  • 12V lighting, homologated, with bulbs, LED perimeter lighting
  • Pneumatic two-line braking system with ALB
  • Hydraulic installations made of galvanised steel tubes and flexible hoses
  • Hydraulic connectors to tractor, type ISO 7241-1 DN 12.5
  • New 550/60-22.5 wheels
  • Axle from renowned ADR company, full beam with 90 mm square cross-section, 400×80 brake
  • Two wheel chocks placed in galvanised pockets
  • articulated PTO shaft
  • Tandem suspension on parabolic leaf springs
  • Drive shafts coupled to articulated PTO shafts equipped with clutch protecting the transmission:
    friction and one-way
  • Exchangeable adapter blades
  • Exchangeable, galvanised skids of fl oor conveyor strips
  • Distance between chains secures against divergence of chains during work
  • Floor conveyor powered by two transmissions, 4000 Nm each

Dodatkowe wyposażenie Additional equipment

  • Hot-dip galvanised volume extensions with a hydraulic rear hatch – height 800 mm * (* it is not
    possible to mount the extensions together with the adapter)
  • Full LED lighting
  • Hydraulic quick-coupler with pressure neutralizer in hose
  • Homologated, hydraulic double-circuit brake system with automatic braking force adjustment
  • New 600/50-22.5 wheels
  • Wide-angle articulated PTO shaft
  • Warning triangle
  • Digital control – conveyor drive control, rear wall, volume hatch, hydraulic drawbar support, hydraulic
    defl ectors
  • Conveyor’s hydraulic feed with electric control in tractor cabin
  • K80 drawbar hitch (permitted drawbar eye load up to 4,000 kg)

Cookies

The website uses cookies. By using this website you agree to the use of cookies.

Newsletter