Spreaders

NRN “Aligator” MANURE SPREADER 10T

keyCheck the machine rental offer
NRN “Aligator” MANURE SPREADER 10T
Side walls bent from 3mm S355 steel sheet, 900 mm high - hot-dip galvanised
Height of loading box walls 1,160 mm
A2V adapter - 2 balanced inclined vertical drums with bolted knives, with lime board, hot-dip
galvanised
Top and bottom frame hot-dip galvanised (structure protected on exterior and interior of profiles)
Hydraulic shaft support partially hot-dip galvanised
New 550/60-22.5 wheels
Axles from renowned ADR company, full beam with 100 mm square cross-section, 406x120 brake
Two wheel chocks placed in galvanised pockets

Dane techniczne Technical data

  • Administrative loading capacity ~7,860 kg (8,860 kg
    with K80 harnass)
  • Technical loading capacity ~10,000 kg*
  • Gross vehicle weight rating according to PL regulations ~13,000 kg (14,000
    kg with K80 harnass)
  • Unladen mass ~ 5,140 kg*
  • Number of axles 1
  • Adapter A2V adapter – 2
    vertical drums
  • Conveyor drive Hydraulic lock
  • Adapter drive Mechanical from the
    PTO shaft
  • Length 8,670 mm
  • Width 2,900 mm
  • Height 2,925 mm
  • Length of loading space ext. (góra) 5,350 mm
  • Width of loading box interior 1,480 / 2,115 mm
  • Height of loading box walls 1,160 mm
  • Openable side walls No

* – unladen mass and loading capacity may vary depending on equipment


  • Height of platform from base 1,120 mm
  • Loading height 2,285 mm
  • Floor/wall sheet thickness 3 / 3 mm
  • Loading capacity (loading 5cm above the side walls) 11.3 m3 (heaped 14.8 m3)
  • Track of wheels 2,350 mm
  • Suspension parabolic springs
  • Max. vertical drawbar eye load 3,000 kg (4,000 kg
    with K80 harnass)
  • Drawbar coupling height – lower position ~ 515 mm
  • Max. tolerable axle load 10,000 kg
  • Tyre size 550/60-22.5
  • Design speed 40 km/h
  • Minimum demand for tractor power 66kW/90KM
  • Spreading width depending on manure used ~8-16 m**

** – spreading width may differ from the specified width depending on the material used

Cechy produktu i wyposażenie Features and accessories

  • Side walls bent from 3mm S355 steel sheet, 900 mm high – hot-dip galvanised
  • Hot-dip galvanised wall extensions 260mm
  • A2V adapter – 2 balanced inclined vertical drums with bolted knives, with lime board, hot-dip galvanised
  • The floor and side walls are made of one piece to improve the tightness of the spreader
  • Rigid drawbar integrated with the frame
  • Hydraulic advance of conveyor with stepless regulation and overload valve
  • Hot-dip galvanised hydraulic rear wall
  • Hot-dip galvanised adapter cover
  • Hot-dip galvanised front guard, meeting safety requirements
  • Bolted drawbar diam. 50
  • Top and bottom frame hot-dip galvanised (structure protected on exterior and interior of profiles)
  • Hydraulic shaft support partially hot-dip galvanised
  • Hot-dip galvanised conveyor chain – 14×50 links
  • Exchangeable hot-dip galvanised conveyor strips made of metallurgical C65 profile
  • Parking brake made with the assistance of spring membrane cylinders
  • Hot-dip galvanised removable exterior ladder with anti-skid steps, facilitating access to the load box
  • Star wheels made of spheroidal graphite iron
  • Deflectors
  • Lighting installation connector cable with 7PIN 12V plug
  • 12V lighting, homologated, LED
  • Pneumatic two-line braking system with ALB
  • Hydraulic installations made of galvanised steel tubes and flexible hoses
  • Hydraulic connectors to tractor, type ISO 7241-1 DN 12.5
  • New 550/60-22.5 wheels
  • Axles from renowned ADR company, full beam with 100 mm square cross-section, 406×120 brake

Dodatkowe wyposażenie Additional equipment

  • Two wheel chocks placed in galvanised pockets
  • articulated PTO shaft
  • Spring suspension on parabolic leaf springs
  • Drive shafts coupled to articulated PTO shafts equipped with clutch protecting the transmission: friction and one-way
  • Exchangeable adapter blades
  • Exchangeable, galvanised skids of fl oor conveyor strips
  • Floor conveyor powered by two transmissions, 4000 Nm each
  • Wood skids for conveyor chains under upper frame
  • Hot-dip galvanised bracket for connectors, adjustable
  • Hydraulic quick-coupler with pressure neutralizer in hose
  • New 600/50-22.5 wheels
  • Wide-angle articulated PTO shaft
  • Warning triangle
  • Conveyor’s hydraulic feed with electric control in tractor cabin
  • K80 drawbar hitch (permitted drawbar eye load up to 4,000 kg)

Cookies

The website uses cookies. By using this website you agree to the use of cookies.

Newsletter