Check the machine rental offer
Side walls bent from 3mm S355 steel sheet, 900 mm high - hot-dip galvanised
A2V adapter - 2 balanced inclined vertical drums with bolted knives, with lime board, hot-dip
galvanised
galvanised
Hydraulic drawbar support
Hot-galvanized hydraulic rear wall
Hot-dip galvanized adapter cover
Partially hot-dip galvanized hydraulic drawbar support
New 550/60-22.5 wheels
Axles from renowned ADR company, full beam with 100 mm square cross-section, 406x120 brake
Technical data
- Administrative loading capacity ~7,940 kg*
- Technical loading capacity ~8,940 kg*
- Gross vehicle weight rating according to PL regulations ~13,000 kg (14,000 kg with K80
harnass) - Unladen mass ~ 5,060 kg*
- Number of axles 1
- Adapter A2V adapter – 2 vertical drums
- Length 8,670 mm
- Width 2,900 mm
- Height 2,925 mm
- Length of loading space ext. (góra) 5,350 mm
- Width of loading box interior 1,480 / 2,115 mm
- Height of loading box walls 900 mm
- Height of platform from base 1,120 mm
* – unladen mass and loading capacity may vary depending on equipment
- Loading height 2,025 mm
- Floor/wall sheet thickness 3 / 3 mm
- Conveyor drive Hydraulic lock
- Adapter drive Mechanical from the PTO shaft
- Openable side walls No
- Loading capacity (loading 5cm above the side walls) 8.35 m3 (heaped 11.9 m3)
- Track of wheels 2,350 mm
- Suspension parabolic springs
- Max. vertical drawbar eye load 3,000 kg (4,000 kg with K80
harnass) - Drawbar coupling height – lower position ~ 515 mm
- Max. tolerable axle load 10,000 kg
- Tyre size 550/60-22.5
- Design speed 40 km/h
- Minimum demand for tractor power 66kW/90KM
- Spreading width depending on manure used ~8-16 m**
** – spreading width may differ from the specified width depending on the material used
Downloads
Features and accessories
- Side walls bent from 3mm S355 steel sheet, 900 mm high – hot-dip galvanised
- A2V adapter – 2 balanced inclined vertical drums with bolted knives, with lime board, hot-dip galvanised
- The floor and side walls are made of one piece to improve the tightness of the spreader
- Rigid drawbar integrated with the frame
- Hydraulic advance of conveyor with stepless regulation and overload valve
- Hot-dip galvanised hydraulic rear wall
- Hot-dip galvanised adapter cover
- Hot-dip galvanised front guard, meeting safety requirements
- Bolted drawbar diam. 50
- Top and bottom frame hot-dip galvanised (structure protected on exterior and interior of profiles)
- Hydraulic shaft support partially hot-dip galvanised
- Hot-dip galvanised conveyor chain – 14×50 links
- Exchangeable, hot-dip galvanised conveyor strips made of metallurgical C65 profile
- Parking brake made with the assistance of spring membrane cylinders
- Hot-dip galvanised removable exterior ladder with anti-skid steps, facilitating access to the load box
- Star wheels made of spheroidal graphite iron
- Deflectors
- Lighting installation connector cable with 7PIN 12V plug
- 12V lighting, homologated, LED
- Pneumatic two-line braking system with ALB
- Hydraulic installations made of galvanised steel tubes and flexible hoses
- Hydraulic connectors to tractor, type ISO 7241-1 DN 12.5
- New 550/60-22.5 wheels
- Axles from renowned ADR company, full beam with 100 mm square cross-section, 406×120 brake
Additional equipment
- Two wheel chocks placed in galvanised pockets
- articulated PTO shaft
- Spring suspension on parabolic leaf springs
- Drive shafts coupled to articulated PTO shafts equipped with clutch protecting the transmission:
friction and one-way - Exchangeable adapter blades
- Exchangeable, galvanised skids of fl oor conveyor strips
- Hydraulic quick-coupler with pressure neutralizer in hose
- New 600/50-22.5 wheels
- Other equipment
- Wide-angle articulated PTO shaft
- Warning triangle
- Conveyor’s hydraulic feed with electric control in tractor cabin
- K80 drawbar hitch (permitted drawbar eye load up to 4,000 kg)
Gallery
